Pagina principala » LABORATOR » Ortodonție » Accesorii

Accesorii

Quadrangular wax sticks LE-R3712-00 | Leone - R3712-00

• 3x3 mm cross section

Pack: 110 sticks (25 cm)

37,70 EUR
198,10 RON

+ 21% TVA + Taxe de expediere

Utility wax LE-R3710-00 | Leone - R3710-00

• Highly soft wax in strips which bends at room temperature without breaking
• Thanks to its good adherence and high workability, it serves to border the impressions to obtain the base of the mould

Pack: 24 pieces

36,40 EUR
191,27 RON

+ 21% TVA + Taxe de expediere

Modelling wax LE-R3711-00 | Leone - R3711-00

Wax in sheets. It moulds, both cold and hot, without breaking

Pack: 500 g

33,49 EUR
175,98 RON

+ 21% TVA + Taxe de expediere

Bite wax LE-R3730-00 | Leone - R3730-00

• Necessary for taking accurate occlusal impressions
• A special aluminium foil lessens distortions
• 5 mm thick

Pack: 24 pieces

51,95 EUR
272,98 RON

+ 21% TVA + Taxe de expediere

Thermo wax for undercuts LE-R3714-00 | Leone - R3714-00

• High melting point: 104° C
• Particularly suitable to eliminate undercuts. It prevents damage to be caused to the acrylic brightness

Pack: 100 g in stick

27,49 EUR
144,45 RON

+ 21% TVA + Taxe de expediere

Sticky wax LE-R3713-00 | Leone - R3713-00

• High sticky power
• Extreme strength of adhesion to fix the various elements (screws, wires etc.) to the model

Pack of 100 g in stick

24,49 EUR
128,69 RON

+ 21% TVA + Taxe de expediere

Solder for stainless steel LE-R0221-00 | Leone - R0221-00

• For use with bridges and crowns
• Cadmium free. Silver: 49%
• Melting range: 680° - 705° C

Spool: 1 mm in diameter, 10 g approx.

34,99 EUR
183,86 RON

+ 21% TVA + Taxe de expediere

Orthodontic solder, wire form, 0.4 mm LE-R0222-00 | Leone - R0222-00

• For all orthodontic brazing works
• Cadmium free. Silver: 55%
• Melting range: 630° - 660° C

Spool: 10 g approx

54,49 EUR
286,33 RON

+ 21% TVA + Taxe de expediere

Orthodontic solder, tape form, 1 mm x 0.5 mm LE-R0223-00 | Leone - R0223-00

• For all orthodontic brazing works
• Cadmium free. Silver: 55%
• Melting range: 630° - 660° C

Spool: 10 g approx

54,49 EUR
286,33 RON

+ 21% TVA + Taxe de expediere

Orthodontic solder, Rods, 1 mm in diameter LE-R0224-00 | Leone - R0224-00

• For all orthodontic brazing works
• Cadmium free. Silver: 55%
• Melting range: 630° - 660° C

Spool: 10 g approx

54,49 EUR
286,33 RON

+ 21% TVA + Taxe de expediere

Solder powder LE-R0225-00 | Leone - R0225-00

• Powder for orthodontic solders

Pack: 50 g approx.

16,35 EUR
85,91 RON

+ 21% TVA + Taxe de expediere

Flux LE-R0226-00 | Leone - R0226-00

In paste, for solders

Pack: 30 g approx.

16,35 EUR
85,91 RON

+ 21% TVA + Taxe de expediere

Thermo insulator paste for solders LE-R0227-01 | Leone - R0227-01

• It protects plaster and resin during soldering procedure
• Excellent consistency
• Easy to remove with water

Pack of 235 ml

33,65 EUR
176,82 RON

+ 21% TVA + Taxe de expediere

Rubber model base formers, large LE-T3320-00 | Leone - T3320-00

Pack: 1x upper, 1x lower

65,95 EUR
346,55 RON

+ 21% TVA + Taxe de expediere

Rubber model base formers, small LE-T3321-00 | Leone - T3321-00

Pack: 1x upper, 1x lower

65,95 EUR
346,55 RON

+ 21% TVA + Taxe de expediere

Vertical model occluder LE-T1121-00 | Leone - T1121-00

Entirely made of stainless steel with high precision.

124,90 EUR
656,31 RON

+ 21% TVA + Taxe de expediere

Locking screw for vertical model occluder "Leone T1122-00" LE-T1122-00 | Leone - T1122-00

1 piece

14,95 EUR
78,56 RON

+ 21% TVA + Taxe de expediere

Fixator 072-004-00 | DENTAURUM GmbH & Co. KG - 072-004-00

după Gordon

Dispozitivul auxiliar practic pentru fixarea precisă a modelelor în poziția de mușcătură de construcție.
Cu ghidaj dublu telescopic rotund. Modelele fixate în gips pot fi îndepărtate și reintroduse cu ușurință.

139,50 EUR
733,03 RON

+ 21% TVA + Taxe de expediere

Roghe spatula OD-710 | - OD-710

1 unitate

3,90 EUR
20,49 RON

+ 21% TVA + Taxe de expediere

Plaster spatula OD-711 | - OD-711

1 unitate

4,90 EUR
25,75 RON

+ 21% TVA + Taxe de expediere

Aparat cu soclu conform prof. Hinz 92010 | Dr. Hinz Dental - 92010

• Manevrare ușoară
• Montare tridimensională

• Nu este necesară tăierea

139,95 EUR
735,40 RON

+ 21% TVA + Taxe de expediere

Trays for plaster models OD-777 | Dr. Hinz Dental - 92101

• Made from white plastic

• Hinged at the rear

Pack: 100 pairs

126,90 EUR
666,82 RON

+ 21% TVA + Taxe de expediere

Model cutii, alb 7027-W | OrthoDepot GmbH

• Dimensiuni: 30,5 cm x 8,5 cm x 6,5 cm

• Potrivit pentru 4 modele

• Stivuitoare

• Fabricat în Germania

Cutie: 50 de bucăți

137,95 EUR
724,89 RON

+ 21% TVA + Taxe de expediere

Cutie pentru machete din carton, stivuibilă 7035 | OrthoDepot GmbH

Organizați-vă cu ușurință toate modelele într-un spațiu redus cu cutia pentru modele OrthoDepot.

• Pentru 3 modele complete (maxilarul superior și inferior) în fiecare cutie
• Stivuibile, pentru a vă organiza toate modelele în mod ordonat. Astfel economisiți spațiu
• Format de sertar, pentru a putea scoate modelele dorite fără a deranja ordinea celorlalte modele

Cutia are următoarele dimensiuni în stare asamblată: lungime – 26,8 cm, lățime – 10 cm, înălțime – 7,4 cm

Cutie: 100 bucăți (nepliate)

RRP 149,00 EUR
782,95 RON
Doar 132,05 EUR
693,88 RON

+ 21% TVA + Taxe de expediere

Contouring scissors, serrated

1 unit

7,95 EUR
41,77 RON

+ 21% TVA + Taxe de expediere

Contouring scissors

1 unit

7,95 EUR
41,77 RON

+ 21% TVA + Taxe de expediere

Afișați 1 to 26 (accesări 26 produse)